Today I began putting together my new system. Let me explain my problems and maybe somebody can help. Booted fine no problem to begin with. Began Windows installation and when system rebooted, lights came on, but no Hard Drive sounds no Monitor, no Keyboard nothing. So I tried diffrent things and one such thing was to clear the CMOS using Motherboard Jumper. After doing this system reboots I set CMOS for Default settings. Everything running fine install next portion of Windows XP and when reboots same problem. So again after clearing the CMOS system reboots. Finish installing windows all is good no other problems at all. But everytime I boot my computer it must have a clear CMOS or nothing happens, WHat's my Problem. Why is my motherboard stalling out on me?