OC is STABLE @ 4.00Ghz :D :D

LukaszR1

Fully Optimized
Messages
2,833
Here are the settings i managed to get my E8400 to run stable at 4.00Ghz with ram at 890Ghz.

Sytem Clocks:
PCIEX16_2: 100 MHz
PCIEX16_1: 100 Mhz
SPP<->MCP: 250.0 Mhz

FSB & Memory Config
Clock Mode: Linked
Ratio: Sync Mode
FSB (QDR): 1780 (445)
Mem Mhz: 890.0

OC'ing
CPU Multiplier: 9.0
LDT Frequency: 5x
Intel SpeedStep: Disabled
Virt Technology: Disabled
Limited CPUID MaxVal: Disabled
CPU Thermal control: Disabled


Voltages set @
Vcore: 1.36250
CPU VTT: 1.35
Memory: 2.11
bro4: 1.20
1.2 HT: Auto
NB: 1.66
SB: 1.55
gtluref: 0.68x VTT

Nvidia GPU Ex Disabled




Could someone please let me know if my voltages are safe? specifically my NB and SB.

Running Prime95 for stability as of right now. Successfully shut down pc and booted up with these settings.

So, how'd I do on my first OC?? :D
 

esa193

Fully Optimized
Messages
4,210
very safe and very good!
now if your an expert try tweaking it more to get lowest possible voltages
i really gotta start on overclocking my q6600
 

LukaszR1

Fully Optimized
Messages
2,833
very safe and very good!
now if your an expert try tweaking it more to get lowest possible voltages
i really gotta start on overclocking my q6600
thank you!
I think i will leave it as is for now....gonna run my prime95 for the entire night. Then i will slowely start tweaking the voltages down abit.
 

Cabbs

Golden Master
Messages
7,912
You need to get your CPU VTT down like, now.

I don't know how much voltage Nvidia chipsets take.
 

LukaszR1

Fully Optimized
Messages
2,833
You need to get your CPU VTT down like, now.

I don't know how much voltage Nvidia chipsets take.
Down? when i was doing my research...many of the people who have my mobo are running theirs at 1.4. Do you suggest something better?
 

esa193

Fully Optimized
Messages
4,210
you should try to get them all down tho just better for over all overclocking
fool around with it and keep fine tuning
 
Top