Not only MY computer...

opps sry : /

guess i was lazy an didnt it all through

it is probably the board then, if ya both changed drives, and the board is the only thing that is the same now, right?

got any other boards around to try out?
 
Sounds like you did a hot swap. Regardless of what M$ says you shouldn't do that. Other thing that comes to mind is you haven't mentioned any bios changes. You might want to reset/clear the bios.
 
Do your PCs freeze up if in safe mode?

can't get past the bios...

Sounds like you did a hot swap. Regardless of what M$ says you shouldn't do that. Other thing that comes to mind is you haven't mentioned any bios changes. You might want to reset/clear the bios.

I will tell him to take out the Cmos battery for a minute or 2

My 6200 just died so all i get is a black screen.
 
Clear CMOS and make sure you're using up to date drivers. If there's a known issue from these boards, flash your BIOS, even though I don't usually say that in the first posts.
 
His is fixed now


I just got a e6600 and put it in. My monitor is not getting any signal

help me
 
Back
Top Bottom