Just built a new computer with the following specs:
Intel 630
ECS PF4
Corsair DDR2533 512mb x 2 (dual channel)
Seagate 120gb SATA
Liteon s1693s
Gigabyte 6600T Pcie
SPI Green Power 350w psu
Antec SLK3000B
Windows XP Pro with SP2
When i boot up the computer everything works fine. When i turn off the computer and try to boot it up again within a couple of minutes then everything is fine. However, if i try booting up after 5 min or so, the power LED is on and everything seems to be working except that there is "no video input" on my 19 inch philips LCD. In order to boot up my computer i need to manually switch off the power button on the PSU or at the power point, wait for a couple of minutes and then boot up. I basically have to use the PSU power button which is rather annoying.
I have tried changing the PSU, video card to a 6200TC and ram all to no avail. I have returned the motherboard and the technician says the board is not faulty.
Any one has any advice?
Intel 630
ECS PF4
Corsair DDR2533 512mb x 2 (dual channel)
Seagate 120gb SATA
Liteon s1693s
Gigabyte 6600T Pcie
SPI Green Power 350w psu
Antec SLK3000B
Windows XP Pro with SP2
When i boot up the computer everything works fine. When i turn off the computer and try to boot it up again within a couple of minutes then everything is fine. However, if i try booting up after 5 min or so, the power LED is on and everything seems to be working except that there is "no video input" on my 19 inch philips LCD. In order to boot up my computer i need to manually switch off the power button on the PSU or at the power point, wait for a couple of minutes and then boot up. I basically have to use the PSU power button which is rather annoying.
I have tried changing the PSU, video card to a 6200TC and ram all to no avail. I have returned the motherboard and the technician says the board is not faulty.
Any one has any advice?