Need Help - on board LAN doesnt work

Status
Not open for further replies.

dgr8dude

Solid State Member
Messages
7
Hi,

I've recently bought an AOpen mx46 motherboard with a 1.6 GHz P4 cpu off ebay. It has onboard video, LAN, and Realtec audio, but the LAN doesnt work. I was able to get the drivers for all, but the LAN still doesnt work. I can only connect to the internet thru a usb to ethernet adapter and the PCI slots doesnt work as well. Can somebody help me figure out what to do? Thanks!
 

FlashDude

Daemon Poster
Messages
1,232
Location
NB, Canada
Hi, Have you tryed clearing the cmos/pull the battery

You are sure it is the mx46 and not one of the many simular, like the mx46 533? And you installed These drivers

If you are sure that is the board and you installed those drivers then contact the seller on Ebay or buy yourself another board.
Like this one
 

mophead740

In Runtime
Messages
325
also try installing the drivers one by one
i had a similar problem with my mobo but reinstalling the drivers one by one seemed to do the trick
 

FlashDude

Daemon Poster
Messages
1,232
Location
NB, Canada
Well you need to look on the board to make sure that is the exact model number, And if it is then the onboard is probably no good. But it would probably be cheaper to just get a cheap 10/100 nic card then it would be to send it back.

Like this one
 
Status
Not open for further replies.
Top Bottom