Memory which one should I get?

[Äߧý∩†H♠H䎀]

Well I did want to again thank the members for helping me diagnose my PSU problem a few weeks ago. Now as I said in that thread when I had it running with 2 of the 4 sticks they gave me errors. Now that I have my new PSU hooked up I'm kind of wary about putting those sticks back in to test if their any good or not. I'm kind of thinking maybe one of those shorted something out or something.

DDR2 memory is so cheap now I just figured I'd get some new memory to replace all 4 slots. I'm looking at the following kits. I've used G.Skill prior and had good experience with them so I'm kind of leaning towards them.

G.SKILL 8GB (4 x 2GB)

OCZ Reaper 4GB (2 x 2GB) 2, 4GB Kits

 

[rohan23]

Unless you're overclocking, you can stick with 800 or 1066.

http://www.newegg.com/Product/Product.aspx?Item=N82E16820227290


If you're not editing, you can stick with 4GB and save yourself some more money.

 

[nevermind1534]

Sometimes, depending on what memory you have, you need to up the voltage of it.

I always liked OCZ.

 

[Atomic Rooster]

The G.Skill. It has better timings. They make some good stuff. Very reliable.

 

[nevermind1534]

The G.Skill. It has better timings. They make some good stuff. Very reliable.

But the OCZ is rated to run at a higher speed. You could lower the speed (if you have a CPU with a 1066 FSB, run the memory at that) and do better timings.

 

[Äߧý∩†H♠H䎀]

Alright thanks for the input guys. I've ordered the G.Skill on a overnight shipment so I should have them Thursday.