LCD Ribbon Cable

[LastKnownUser]

New here but didn't see any tech forum for LCD screens. So If in the wrong place, Please do move. Thank you.

LCD tech is very very new to me. But I'm doing a Personal Project that involves Small LCD screens. Like 3 inches small.

I found some LCD screens but before I buy I need to know What to plug into the ribbon cables to give the LCD screen power and Video. I have two screens I'm thinking about using. Here are the direct links to the photos. I have tried some independent research into what these cables are and I come up empty handed every time. I have a quote into some Ribbon cable manufacturers but it might be a few days getting a reply considering its a weekend. If no answer by then from the community I will post an answer myself if I find one.


http://i276.photobucket.com/albums/kk34/valekshadow/8d8f_2.jpg Polaroid I835 Dig cam screen

http://i276.photobucket.com/albums/kk34/valekshadow/f5cc_1.jpg canon sd630 camera screen.

As you can see they seem to be different Ribbon cable hookups.

Anyone able to help me out?

(P.S. If your curious I'm Trying to use these screens combined with a small wireless camera for use in an Augmented reality project. )

 

[DoubleHelix]

They connect to laptop motherboards. If you're trying to build something else with them, you'll need to do some rewiring. They won't directly connect as is to anything else.

 

[LastKnownUser]

Okay, This is what I got so far while researching. (I swear I was pulling out my hair this morning trying to even get this.. >.< )

I Found just the right size LCD screen with the Module attached that accepts analog input through "Composite, 1v p-p, 75 Ohm" Input connector. But BUT!!, I Cannot find a "Composite, 1V p-p, 75 OHM" Cable. If I understand right composite=RCA. The only thing is, I Can't find the cable with one end RCA and the other the little 2pin connection head. Or even the tools to make it myself.
If you could, Those of you hardware minded, take a look at the Picture below and make what you will of it and Tell me what you think type of cable connects in there. (unless you know where I can get a "Composite yada yada yada" cable so I can use it right away. )

http://i276.photobucket.com/albums/kk34/valekshadow/bb236.jpg

The following link is the specs on the actual device, What power adapters it needs and what not.

http://www.electronics123.com/amazon/datasheet/c527a.pdf

Thanks in advance ( and man I was really going nuts, I was venturing to all the china LCD manufactures and Module makers. If you ever get into Micro tech, which it seems I am, IT because one big head ache if your not expecting it. There is literally "NO Do it yourself" tutorials on Mini LCD at all I could find. )