kevinscallan
Baseband Member
- Messages
- 38
I am currently running a CDROM and DVDROM/RW Drive and they are IDE Interface and have got a Seagate Barracude SATA HDD.
I have connected the SATA HDD to SATA 1 for Master but was wondering about setting the jumper caps to Master or Slave on the Optical Drives.
I am using CDROM on Primary IDE Porst so i am guessing that this has to be set to Master.
I am using DVDROM/RW on Secondary IDE Port so i am guessing that this has to be set to Master too.
Please correct me if i am wrong.
Any help is much appreciated.
I have connected the SATA HDD to SATA 1 for Master but was wondering about setting the jumper caps to Master or Slave on the Optical Drives.
I am using CDROM on Primary IDE Porst so i am guessing that this has to be set to Master.
I am using DVDROM/RW on Secondary IDE Port so i am guessing that this has to be set to Master too.
Please correct me if i am wrong.
Any help is much appreciated.