Would someone be able to tell me if G.Skill RipJaws V DDR4- 3600 8GBx2 (F4-3600C19D-16GVRB) will work with a Z390 Aorus Pro Wifi Motherboard? I have an issue where the DRAM light comes and won't post but after I power off and on for about 5 minutes it will eventually take. Just wondering if this is a compatibility issue or not or a possible short in the mobo any help would be appreciated.
I have taken everything apart piece by piece and also done and out of the case build. I have reseated the cpu and checked the pins. Checked the PSU with one I know works and get the same problem. I have taken the RAM out and put just a single one in each slot each time with both pieces of RAM and still get the issue. Unfortunately I do not currently have diff DDR4 ram to test
Specs:
CPU: I9 9900k
Memory: G.Skill RipJaws V DDR4- 3600 8GBx2 (F4-3600C19D-16GVRB)
Cooling: Noctua NHD15
Mobo: Z390 Aorus Pro Wifi
Storage: XPG SX8200 Pro M.2 2280 PCIe Gen 3x4 SSD
PSU: RM850x
I have to boot the system constantly and it will sometimes take. Any help would be greatly appreciated.
Thank you!
I have taken everything apart piece by piece and also done and out of the case build. I have reseated the cpu and checked the pins. Checked the PSU with one I know works and get the same problem. I have taken the RAM out and put just a single one in each slot each time with both pieces of RAM and still get the issue. Unfortunately I do not currently have diff DDR4 ram to test
Specs:
CPU: I9 9900k
Memory: G.Skill RipJaws V DDR4- 3600 8GBx2 (F4-3600C19D-16GVRB)
Cooling: Noctua NHD15
Mobo: Z390 Aorus Pro Wifi
Storage: XPG SX8200 Pro M.2 2280 PCIe Gen 3x4 SSD
PSU: RM850x
I have to boot the system constantly and it will sometimes take. Any help would be greatly appreciated.
Thank you!