Computer REBOOTING - can't understand dump file

Status
Not open for further replies.

trfletch

Beta member
Messages
4
Hi all, my friend has a computer that every so often reboots for no reason, it did it yesterday (monday) and last thursday. I have the mini dump file but I don't understand it that well and wondered if anyone can make sense of it. Cheers




Microsoft ® Windows Debugger Version 6.6.0003.5
Copyright © Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini062606-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp2_rtm.040803-2158
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055ab20
Debug session time: Mon Jun 26 13:40:29.543 2006 (GMT+1)
System Uptime: 0 days 4:31:35.606
Loading Kernel Symbols
.......................................................................................................................
Loading User Symbols
Loading unloaded module list
...............
************************************************************
*******************
* *
* Bugcheck Analysis *
* *
************************************************************
*******************

Use !analyze -v to get detailed debugging information.

BugCheck 100000D1, {0, ff, 1, e1491c68}

Probably caused by : ntoskrnl.exe ( nt!SepCreateImpersonationTokenDacl+5d )

Followup: MachineOwner
---------

kd> !analyze -v
************************************************************
*******************
* *
* Bugcheck Analysis *
* *
************************************************************
*******************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 00000000, memory referenced
Arg2: 000000ff, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: e1491c68, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: 00000000

CURRENT_IRQL: ff

FAULTING_IP:
+ffffffffe1491c68
e1491c68 010500000000 add [00000000],eax

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: INTEL_CPU_MICROCODE_ZERO

BUGCHECK_STR: 0xD1

LAST_CONTROL_TRANSFER: from 80581af1 to e1491c68

STACK_TEXT:
WARNING: Frame IP not in any known module. Following frames may be wrong.
f51c5c64 80581af1 00000001 ffdff120 20206553 0xe1491c68
f51c5c88 805708f5 e1491a90 e2de6da8 f51c5cfc nt!SepCreateImpersonationTokenDacl+0x5d
f51c5d30 8056c39b fffffffe 000f01ff 00000001 nt!NtOpenThreadTokenEx+0x100
f51c5d4c 804df06b fffffffe 000f01ff 00000001 nt!NtOpenThreadToken+0x18
f51c5d4c 7c90eb94 fffffffe 000f01ff 00000001 nt!KiFastCallEntry+0xf8
0084fce0 00000000 00000000 00000000 00000000 0x7c90eb94


STACK_COMMAND: kb

FOLLOWUP_IP:
nt!SepCreateImpersonationTokenDacl+5d
80581af1 8bf8 mov edi,eax

FAULTING_SOURCE_CODE:


SYMBOL_STACK_INDEX: 1

FOLLOWUP_NAME: MachineOwner

SYMBOL_NAME: nt!SepCreateImpersonationTokenDacl+5d

MODULE_NAME: nt

IMAGE_NAME: ntoskrnl.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 41108004

FAILURE_BUCKET_ID: 0xD1_W_nt!SepCreateImpersonationTokenDacl+5d

BUCKET_ID: 0xD1_W_nt!SepCreateImpersonationTokenDacl+5d

Followup: MachineOwner
---------
 

Apokalipse

Golden Master
Messages
14,559
Location
Melbourne, Australia
see if this helps:

start -> run
"sfc /scannow" (without quotes)

then put in your XP CD

basically, it checks all the Windows files against the ones on the CD to make sure they're not corrupt
 

trfletch

Beta member
Messages
4
Thanks I will try that although the computer has just been formatted and had a clean installation of XP so I don't think that will be the problem. The problem was occurring before the installation as well so that is not the cause either.
 

trfletch

Beta member
Messages
4
I have downloaded it I just haven't tried it yet, I just remotely connect to their PC and ran PC Wizard to check the CPU temp and Fan and all seemed to be in order, the CPU is running at a fairly low temperature of 38C and the CPU Fan is running at a decent RPM.
 

PR Gamer

Baseband Member
Messages
88
It could be a mobo problem google your mobo model to see if it happens on that model I've heard of that once on some models something with the chipset don't remember well.
 

trfletch

Beta member
Messages
4
Well it has recently had a new motherboard but when I try to look at what motherboard it is it says: Unspecified P4V88+
 
Status
Not open for further replies.
Top