I just finished my Chilled WCS idea. Im looking for various recommendation's, and thoughts. At work i seen a friend getting ready to throw out a small fridge from sales. So i took it. The reason he was throwing it out, was because it froze everything. Which is ideal, for my WCS. These small fridges have very tiny freezers. But this fridge, acts as a complete freezer. Even though i was going to pay for a fridge anyways, then do w/e is wrong with this fridge, so it freezes everything. When i cleaned it out, EVERYTHING was frozen. With that, im going to get 2 Rad's from dangerden. Then emerge my Rad's in some type of unit, which will be pure ice. Im going to need a damn good pump too, so i can circulate coolant properly. Also im going to make my own tubing insulator, which will cover around 12'inches of tubing.
The insulated tubing, will be inside the fridges freezer, because i believe it will be slighly colder there. Inside the insulation, will
be a small amount of water, which will turn to ice. I might simply use pure coolant, since it will get as cold as water anyways. I have not finshed my insulation patent. So any ideas will help alot their. Im going with a copper TDX block. Not completely sure what pump though. Im not going to OC my PE, since i have read its already near its architectural limits. So a 20mhz OC, i can live without. Paying for a 50$ gpu block, and more tubing is not worth such a low OC. I should of got a 6800 GT, then OC past Ultra speeds. Then have a way better video card then a X800 XT PE. But OC my GPU is not my main concern.
So the result will be. For my coolant to pass through my extremely cold Rad's. Then get as cold as possible from my freezer and insulation process. Just for all the stupid question that might arrive, im well aware i must drill a few holes in my fridge. For anyone else out there. These small fridges only cost around 80-125$. Same cost as a good Rad. My B-day is July-21. So i HOPE my WCS should be finished a few days after that.
The insulated tubing, will be inside the fridges freezer, because i believe it will be slighly colder there. Inside the insulation, will
be a small amount of water, which will turn to ice. I might simply use pure coolant, since it will get as cold as water anyways. I have not finshed my insulation patent. So any ideas will help alot their. Im going with a copper TDX block. Not completely sure what pump though. Im not going to OC my PE, since i have read its already near its architectural limits. So a 20mhz OC, i can live without. Paying for a 50$ gpu block, and more tubing is not worth such a low OC. I should of got a 6800 GT, then OC past Ultra speeds. Then have a way better video card then a X800 XT PE. But OC my GPU is not my main concern.
So the result will be. For my coolant to pass through my extremely cold Rad's. Then get as cold as possible from my freezer and insulation process. Just for all the stupid question that might arrive, im well aware i must drill a few holes in my fridge. For anyone else out there. These small fridges only cost around 80-125$. Same cost as a good Rad. My B-day is July-21. So i HOPE my WCS should be finished a few days after that.