I know this is probably not the place to post this, but I did not see anywhere else. So my problem is that i am doing somewhat of a unique setup with 6 monitors. One big tv in the middle, 3 monitors on top, one on each side of tv. Here is a basic blueprint and my general idea, FRONT: http://gamersanonymous.ca/wp-content/uploads/2012/05/MonitorSetupV2.jpg BACK: http://gamersanonymous.ca/wp-content/uploads/2012/05/MonitorSetupV2back.jpg
I am just looking for some advice on what materials I could use to connect the monitors to the TV and still be able to adjust them a good bit, like a ball joint hinge or something. and the side ones i want the bars to have hinges so that it can be completely flat or at an angle. I just really dont know what kind of stuff I could use to do this. Also, how to not damage the monitor in the process. Thanks!!!
I am just looking for some advice on what materials I could use to connect the monitors to the TV and still be able to adjust them a good bit, like a ball joint hinge or something. and the side ones i want the bars to have hinges so that it can be completely flat or at an angle. I just really dont know what kind of stuff I could use to do this. Also, how to not damage the monitor in the process. Thanks!!!