Putting together a new system. I am using an ocz 700 watt psu. The plugs for the power pins are a little different than I have used in the past. There is a double power plug that has 20 pins on one connector and 4 pins on the other connector. They both fit into the 24 pin socket so I am hoping that I have that right. If I remember the past power supplies that I have used had all 24 pins on one connector? There is also a double power plug on the power supply pigtail that is labeled cpu 1 (4pins) and cpu2 (4pins). The motherboard has a 4 pin socket up above the cpu that is labeled atx-e power (I think). There was a cover over another 4 pins on this socket that would make this an 8 pin socket if I removed it. Do I use both of these cpu power plugs in this 8 pin socket?
Here is a link that shows the power supply and it's related plugs.
http://www.ocztechnology.com/ocz-gamexstream-600w-700w-power-supply-eol.html
Here is a link that shows the power supply and it's related plugs.
http://www.ocztechnology.com/ocz-gamexstream-600w-700w-power-supply-eol.html
