Currently have v 1011 BIOS and may need to update if I replace my Athlon 2200+ with 2700+. OS is XP pro
Using the supplied CD to install Asus Probe V2.15.00 the installation came up with: AsmiEnum
Unknown Chipset
OK
On OK: Asuutek Motherboard Information:
The CPU setting is not provided by the CPU
The CPU setting is the rsult of your jumper setting.
Current settings: Setup program detects no LM75 or any
compatible chip on board.
OK
On OK: Asus probe 2. Access violation at address 00409C2
in modukes @Asusprob.exe@ Read
of address 000030.
OK
On OK: Installation aborted.
The install panel is also greyed out so cannot re-install.
Then Asus update comes up with ASUS BIOSINFO.DLL
Cannot detect ASUS BIOS
OK
On OK: Installation aborted.
Not experienced enough to get this to work and need advice please.
Using the supplied CD to install Asus Probe V2.15.00 the installation came up with: AsmiEnum
Unknown Chipset
OK
On OK: Asuutek Motherboard Information:
The CPU setting is not provided by the CPU
The CPU setting is the rsult of your jumper setting.
Current settings: Setup program detects no LM75 or any
compatible chip on board.
OK
On OK: Asus probe 2. Access violation at address 00409C2
in modukes @Asusprob.exe@ Read
of address 000030.
OK
On OK: Installation aborted.
The install panel is also greyed out so cannot re-install.
Then Asus update comes up with ASUS BIOSINFO.DLL
Cannot detect ASUS BIOS
OK
On OK: Installation aborted.
Not experienced enough to get this to work and need advice please.