9V straight out of psu for fan?

Status
Not open for further replies.

MasterJason

In Runtime
Messages
431
I'm not too sure if that would work..it sound like it should.. but always check properly first. Also the 3.3 V Rail would have to come from the 20/24Pin Motherboard Connector as there is only 3.3V Rail there, not on any standard 4 pin molex connectors. You could always solder a wire onto the back of the board where the 3.3v rail pin in under the 20/24 pin connector.
 
Status
Not open for further replies.
Top