Recent content by GRRRR

do not try to copy every thing by draging a box around it, it will just make your computer crash (particulaly if you have a flakey system anyway)

I know it was dumb but can anyone tell me how to fix it! it is, take a look at this- http://www.hothardware.com/viewarticle.cfm?articleid=574 that was why I bought it

go for the 4000+ I read a review that said there's practicly no difference between them

run msconfig and go to win.ini and system.ini and make sure everything is selected

build, scab around on ebay and you could easily end up paying half what you would pay in a shop I built this macine for no more than £320 (all parts from ebay) amd winchester 3000+ 939 Asus A8v deluxe 1GB ddr 400 ram Ati radeon 9550 256mb 8x dvd -+ rw 80GB hard drive SB live 5.1 audio card

The bios was made for the board but not made by msi, the cpu and mobo are both cabable of going over 300mhz (I know other people who have done this, with a different bios) the board was built for overclocking (and I have a water cooling setup) thats what I thought, but I know some newer...

download second copy here http://www.centered.com/download.html

I have done this before (using seccond coppy) I don't know what ghost 8.0 is so i'll explain using seccond coppy (download it off the net) install second hard drive as a slave set seccond coppy (or ghost 8) to coppy everything to the slave Once it is done , unplug the slave and format...

I flashed the bios on my msi K8N NEO2 plat (different bios that would allow over 300FSB!) now it won't start at all. I looked on msi's website and found this: BIOS Recovery Feature For Award BIOS 1. Make a bootable floopy disk 2. Copy the Award flash utility & BIOS file to the...

I recently bought an AMD 64 3500 and I'm looking for a decen't motherboard to go with it. So far my choices look something like: GA-K8NF-9, MSI K8T NEO2, ASUS A8V Deluxe, GA-K8NS Ultra, MSI K8N NEO4 ect, ect but I realy don't know. What would be the best board for overclocking? Also is it...

OK I just tried a GeForce4 MX 440 (The only other one I had) and it still did the same thing. Is there anything else it could be apart from the video card?

I just tried pc2100 And pc2700 and it still did the same thing. I don't have another video card but I do know that the current one works because it's from another computer (that works). could it be Just that the card is not compatable? (I could try another one but I'd have to go fiddling...

I do have some shitty old pc2100 to try (i'll try it in a minute) and no there aren't any drives connected but you should still get something on the screen right? Thanks for all the help!

when I turn the computer on The fans come on like normal and the cpu gets hot (thats how I know it works). and According to the manual there are only three jumpers on the board: clear CMOS, Keyboard power and USB power... Could it still be Wrong cpu jumper settings?

It's not the PSU, I just tried a diferent one and it did exactly the same thing. I'm not sure exactly what you mean buy hardware causing shorts... the only other hardware in it is a geforce 4 card and a gig of pc3200 Ram. Thanks anyway