Recent content by drevan

thanks for the advice og

nexus, 9 pin (holes) 1394 indeed lol Yep, I could identify firewire vs USB on the board and as a port, but there is a compostite cable running from my front panel USB&FW - I don't know if I should attach it to the board in at the black(FW) or blue(USB) spot (with or without the blue adapter)...

Hi, well I bought the hardware and am most of the way through the build, but hit a stall in attaching the cable from the case-integrated firewire/usb to the mobo. I don't know if the cable is 1934a or USB and I saw a statement in the mobo instructions that says plugging in USB to 1934 can...

ASAP: will the corsair vengeance 2x4gb be OK on the ASUS P8P67? It is not listed in the QVL... at further inspection and research, I believe this are OK - they operate at the 1.5 volts that seems to satisfy the sandy bridge processors/board. Can anyone speak from experience to ease my mind...

If I play anything, it will be Richard Burns Rally GTR2 GTR EVO/WTCC

Thanks so far, guys. Some people have suggested I up the graphics to 560 Ti - is this necessary? I won't be doing any high end gaming, only hobbyist editing of film and raw photographs. For my purposes, would it suffer from going down on the MOBO to asus P8P67 - Asus P8P67 LE (Rev. 3.0) Socket...

Thanks for your reply, NeXuS. In the past few minutes I had found people dissatisfied with the Kingston HyperX so I was already considering the corsair vengeance heatspreader - thanks for the suggestion on the Blue. Thanks also for the suggestion on the power supply-I think you're right. To...

I'm building a machine for general use, photoshop and video editing but nothing very heavy. I only need the case and internals (no monitor, peripherals etc) this is what I've come up with, open to suggestions like a entirely different setup or one or two components can be swapped for something...