Recent content by Belzybub

Finished with oil cooled PC. Has beed working for a Month or so now. I do not run it 24/7. Temps run at around 47 degrees C under load. Starts out running very cool CPU temps then moves up and planes out at 35 to 40 under normal conditions EI surfing the web. Runs 40 to 47/48 or so while play...

Dude if you are getting a gigabyte MB get the EX58 Extreme. I am in love with mine.

I think this would work as well. Newegg.com - G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory - Desktop Memory

the MB is supposed to support 24 gigs right out of the box

Ever seen the Movie Maximum Overdrive? Yank the plug out of the wall and run like ****! The STOP Errors worked for me I had the same problem on my old PC a few months ago.

CPUz sees 6 gigs of RAM, MB does also. XP64 is Only seeing 4G. New Motherboard Gigabyte X58 Extreme and 3x2 sticks of G-Skill RAM. What do I need to do to correct this?

Contradiction? Enjoy Benchtest.Com - Water Cooler 1 LOL so where does this heat go that radiates out and away from Aluminum better? Back into the heatsink by some force like Magic?

Half Truths don't sell on me. I know. "While copper is a good conductor of heat, it is inferior to aluminum for getting rid of the heat it has absorbed." OH SNAP! **** what's that mean? It means it changes to the temp of what it touches quickly then STAYS THAT WAY!!! In good sport man we are...

Ok man you made me laugh on that one. I pretty sure it will cool a GPU or 2 if it will a CPU. I was just saying look around there is alot of cheap ways to just cool a GPU. Link me a place that compares Copper and Aluminum with numbers please. I swear to god I will laugh at you if the numbers are...

Now that is a nice looking block. You said you have 300 bucks after the block? You only want to cool the GPU? 300 bucks is alot if the only thing you want to cool is the GPU. Man you could search the net and find ALOT of goodies for alot less than that. Aquian ICM-509 [06mm, 1/4" ID] - Water...

I have a boat load of parts coming over from the US I really hope this week. So I can start soon. & OMG I LOLED so hard at your redcoat post. good stuff man.

The Reserator is what is going in the fridge. Your tonge will stick to the top it will be so cold before I start.

I just got back from the USA and all I could fit in my suitcase was this the rest was shipped before I left and still not here in Germany yet. So that is the Reserator and the heater core and the other reservoir from koolance. Also the cooling blocks. Lots of other small parts that you can't...

**** it man now that is what I am talking about. Thank you! Tygon I would never use anything else. Claps I was going with an automotive brand I use back when I was a mechanic, they are really stout. Carbon Steal. Look kind of cool as well. Hold up to boiling rad. temps as well. Seeing how I...

Well Aspire looking at it that way as you are. Lets say you have to use oil. Look at it that way. I look at it as a challenge. I think it will be loads of fun to work on. I enjoy this kind of thing greatly. Now if you had to use oil what would you do. Submersion or this type or what? You know I...