should i contact OCZ?

[SteveGTA]

ok well i ran some tests on my RAM using NV Performance and this is what i got (see pic) ...


should i be concerned that the benchmarks are that low? i mean most of them arent even above average and i am running at latencies of 2-2-2-5 at 200MHz and my ram is nice RAM. The rest of the stuff is in my sig and everything else scored above average...

should i contact OCZ?

(btw, the yellow is an avg computer and the pink and blue bars are two of the times that i tested)

they tested read, write, and latency

 

[Joeisalsocool]

First off, thats a nice setup you have there.
I would look into heat first? Whats your CPU temps, j/w I'd check cheap stuff first.

 

[SteveGTA]

my CPU is running at about 31 idle 38-40 load and my GPU runs at about 48 idle idk about load. idk about what heat the RAM is at though.

 

[Joeisalsocool]

Have you tried stress testing the system. Use one of the @Home projects, Prime 95, or MemTest86. You can google them, They should find errors in your RAM.

 

[diabloII]

damn it!

maybe if i could actually see the pictures it would help

btw, have you tried running sis sandra? most people use that to test their read/write, and i can compare mines with yours that way (can be found in the donwload section in www.guru3d.com)