SubliminalX7
In Runtime
- Messages
- 239
- Location
- 10.0.0.NO
Hello all,
I have a Nvidia NVS 510 graphics card. I have and intel DQ87PG motherboard. It does have the PCI Express 3.0 x16 which the card requires.
I have a 350-Watt PSU and the card uses 35-Watts
The card when plugged in gives no display, but it does power on.
I have looked everywhere for product manuals. Never found any.
These are the requirements:
Windows® 8, 7, Vista, XP SP3, Linux®, or Solaris®
PCIe ×16 expansion slot
1GB or more of system memory, 2GB recommended
200MB of available disk space for full driver installation
Blu-ray or DVD-ROM drive and DisplayPort or DVI compatible displays
- See more at: NVIDIA NVS 510 for Quad DVI Low Profile
IT SAYS NOTHING TO HELP ME
I called support and they say UEFI must be enabled for it to work, but NOTHING IN THE INSTRUCTION I GOT SAY THAT
I only can boot legacy because that's how the OS was configured to boot
I check UEFI option and get the uefi shell but only on on-board display
again when I plug in the card I get no display
Please let me know if you can help me. I would appreciate it a lot!
I have a Nvidia NVS 510 graphics card. I have and intel DQ87PG motherboard. It does have the PCI Express 3.0 x16 which the card requires.
I have a 350-Watt PSU and the card uses 35-Watts
The card when plugged in gives no display, but it does power on.
I have looked everywhere for product manuals. Never found any.
These are the requirements:
Windows® 8, 7, Vista, XP SP3, Linux®, or Solaris®
PCIe ×16 expansion slot
1GB or more of system memory, 2GB recommended
200MB of available disk space for full driver installation
Blu-ray or DVD-ROM drive and DisplayPort or DVI compatible displays
- See more at: NVIDIA NVS 510 for Quad DVI Low Profile
IT SAYS NOTHING TO HELP ME
I called support and they say UEFI must be enabled for it to work, but NOTHING IN THE INSTRUCTION I GOT SAY THAT
I only can boot legacy because that's how the OS was configured to boot
I check UEFI option and get the uefi shell but only on on-board display
again when I plug in the card I get no display
Please let me know if you can help me. I would appreciate it a lot!