Introduction
This document describes how to calculate bandwidth use with Simple Network Management Protocol (SNMP).
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Problem
It is sometimes necessary to calculate bandwidth use with SNMP.
Solution
Use this solution to solve this problem.
...
