Ok see sig for my build. Im am working on overclocking this thing. My problem is everything reports different readings. Orthos and CPU-Z report different FSB and multipiler sestting. Both are different from what is set in Bios. Anypme else have any problems with this.
Also regarding the overclock. On this board is there a was to set the 1:1 ratio. The only setting I see is 2.50 and up. Right now am at 9x389 for 3.5 G but with the memory set at 2.50 i get a memory speed of 973 MHz. Also Vcore is set at 1.425 in Bios but i get different reports from CPU-Z.
Just looking for some suggestions.
Also regarding the overclock. On this board is there a was to set the 1:1 ratio. The only setting I see is 2.50 and up. Right now am at 9x389 for 3.5 G but with the memory set at 2.50 i get a memory speed of 973 MHz. Also Vcore is set at 1.425 in Bios but i get different reports from CPU-Z.
Just looking for some suggestions.