i got this PC wizard program
chipset it says Intel i845D
it also says for chipset information:
Chipset Information :
Type : DDR-SDRAM PC2100
Frequency : 133 MHz
FSB/RAM Multiplier : 3/4x
Channels : Single
ECC Diagnostic : No
CAS Latency (tCL) : 2.5 clocks
RAS to CAS (tRCD) : 3 clocks
RAS Precharge (tRP) : 3 clocks
Cycle Time (tRAS) : 6 clocks
is this my current ram or the only type or ram my mobo can support?
also under physical memory:
General Information :
J5G3 (RAS 0, RAS 0) : 256 (Single Bank)
J5G1 (RAS 0, RAS 0) : 256 (Double Bank)
Information SPD EEPROM (J5G3) :
Manufacturer : Micron Technology
Part Number : 8VDDT3264AG-265B1
Serial Number : C100C559
Type : DDR-SDRAM PC2100 (133 MHz) - [DDR-266]
Size : 256 MB (1 rows, 4 banks)
Module Buffered : No
Module Registered : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 2.5v
Manufacture : Week 46 of 2002
Supported Frequencies : 100 MHz, 133 MHz
CAS Latency (tCL) : 2 clocks @100 MHz, 2.5 clocks @133 MHz
RAS to CAS (tRCD) : 2 clocks @100 MHz, 3 clocks @133 MHz
RAS Precharge (tRP) : 2 clocks @100 MHz, 3 clocks @133 MHz
Cycle Time (tRAS) : 5 clocks @100 MHz, 6 clocks @133 MHz
Information SPD EEPROM (J5G1) :
Manufacturer : Micron Technology
Part Number : 16VDDT3264AG-265B1
Serial Number : 361454C9
Type : DDR-SDRAM PC2100 (133 MHz) - [DDR-266]
Size : 256 MB (2 rows, 4 banks)
Module Buffered : No
Module Registered : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Normal (15.625 µs), Self Refresh
Voltage : SSTL 2.5v
Manufacture : Week 3 of 2002
Supported Frequencies : 100 MHz, 133 MHz
CAS Latency (tCL) : 2 clocks @100 MHz, 2.5 clocks @133 MHz
RAS to CAS (tRCD) : 2 clocks @100 MHz, 3 clocks @133 MHz
RAS Precharge (tRP) : 2 clocks @100 MHz, 3 clocks @133 MHz
Cycle Time (tRAS) : 5 clocks @100 MHz, 6 clocks @133 MHz
Memory Controller Information :
Memory Controller : DIMM, SDRAM
Number of connectors : 2
Max. Module Size : 1024 MB
Max. Memory Size : 2048 MB
Supported Speed : 50ns
Supported Voltages : 3.3v
Error Detection Method : No
Error Correction Capability : Unspecified
Current/Supported Interleave : 1-way/1-way