Recent content by nitrofc54

Well i am running a 120MM top fan at about 2800rpm and its supposed to put out 92 cfm at that speed. CPU temp is 40-44 and i also have a side fan, bottom fan and 2 front fans set on intake. The top fan and the 2 back fans are set at exhaust, is this the proper set up? My power supply has 2...

Too cool Trax , i have a new case (demon) and it has the ability to run up to 7,( 1 bottom,1 side, 2 rear,2front,1 top)i have the back2 exhausting, and the side blowing out, am getting 2 front fans to intake. Do i need the side fan to exhaust or intake? The top is an open screen of about 5x5 1/2...

Sorry im so late in replying, its a newer Compac computer (wal-mart bought) but not sure of model #! Could be about 6 months old so im wondering about the 128mb per slot, there are 2 and only 128 was installed factory.Never thought about just the new memory stick, and pulling the factory...

I am new here and have a second question on air flow over a CPU, does it matter which way the fan turns? I was useing a 60mm cpu fan and decided to put in a 80mm with an adapter, the fan is currently pulling air from the heatsink and blowing it out to the side. The cpu runs at 38 C verses 45c...

I am new here and i have a friend with a problem, she has a new compaq computer with only 128mb memeory she ordered a 256 mb stick of memory, and i installed it. The computer says only 224 mb is avaliable and with a 128+256 should be reading at 384,is there a setting that could be wrong or is it...

I have tried to check for downloads on the above mentioned site, also no way to register as it is disabled also! I was looking for downloads to the nhra2/nhra main evevt games. i lost all the downloades cars for these games and since this place was listed as the webdesigner for nitrosim i...