air_man_woody
Baseband Member
- Messages
- 21
OK, yet another problem. I recently upgraded from an AMD Athlon XP 2100 266MHz FSB (Palomino) processor, ASUS A7N266-E mobo, 1024MB PC2100 DDR SDRAM, and PNY GeForce 4 Ti 4600 video card to an AMD Athlon XP 2600 333MHz FSB (Barton), ASUS A7N8X-X mobo, 512 MB PC2700 DDR SDRAM and PNY GeForce FX 5900 video card. I decided, due to recent bugs in my system, to reinstall windows completely by reformatting my hard drive and such. I got all this accomplished, then when windows restarted, it said I needed to restart again (something about USB 2.0), so I did. When I restarted, she went through POST and stopped with a message the said "Verifying DMI data..." and froze. I went into BIOS and verified that all IDE devices, CPU and memory were recognized by my BIOS, and they were. Still, she would not boot passed that same message. If I change my FSB setting to 100MHz (200MHz effective in the AMD world) she goes through POST and gets to the same message but an extension to it: "Verifying DMI data..................update success" then it freezes again. I'm lost, I checked my jumpers on the mobo and they are set, I changed my FSB back to 166MHz (333MHz), made sure the CPU was installed correctly and heatsink was on, etc. I don't know what to do! My "bible", Que's Upgrading and Repairing PCs, says to I have the wrong multiplier (right now it is set to 11.5) or wrong FSB selected in BIOS, or my jumpers are wrong. I don't understand cuz earlier it let me completely install windows without a hitch, though my FSB setting was 100MHz when I installed. I don't understand why my computer worked before but isn't now. I'm lost. Can anyone help me???!?!? I am going to try and set all BIOS settings to default, double check my jumpers, and start from the beginning by installing windows and reformatting again. Other than that, I'm lost. Help me?!?!?