BSOD:STOP Error (Kernel_Data_Inpage_Error) 0x7a - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Software > Microsoft Windows and Software
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 06-25-2006, 07:03 PM   #1 (permalink)
Newb Techie
 
Join Date: Jun 2006
Posts: 3
Default BSOD:STOP Error (Kernel_Data_Inpage_Error) 0x7a

hi,

i am having trouble with a computer i have,

i can get 1-2 hours usage out of it, before the BSOD pops up and gives me this error message:

Kernel_Data_Inpage_Error

STOP : 0x0000007A

(0XE13F4800, 0XC000000E, 0XBF8F7000, 0X16059860)

win32k.sys - Address

BF8F7000 base at BF8000, Datestamp 43446b4e

can anybody/somebody help me to solve this error, as i have trawling through the net for the last 4 hours, and i cant seem to get anywhere nearer solving this problem

thanking you for any help in advance
__________________

frosty007 is offline  
Old 06-26-2006, 01:47 AM   #2 (permalink)
Law
Wizard Techie
 
Law's Avatar
 
Join Date: Aug 2005
Location: the data closet
Posts: 4,200
Default

Stop 0x00000077 or KERNEL_STACK_INPAGE_ERROR

The Stop 0x77 message indicates that a page of kernel data requested from the paging (virtual memory) file could not be found or read into memory. This Stop message can also indicate disk hardware failure, disk data corruption, or possible virus infection.

Possible Resolutions:

* Stop 0x77 messages can be caused by bad sectors in the virtual memory paging file or a disk controller error. In extremely rare cases, depleted nonpaged pool resources can cause this error. If the first and third parameters are zero, the stack signature in the kernel stack is missing, which is an error typically caused by defective hardware. If the I/O status is 0xC0000185 and the paging file is on a SCSI disk, check for cabling and termination issues. An I/O status code of 0xC000009C or 0xC000016A indicates that the requested data could not be found. You can try to correct this by restarting the computer. If a problem with disk integrity exists, Autochk, a program that attempts to mark bad disk sectors as defective so that they are not used in the future, starts automatically. If Autochk fails to run, you can manually perform the integrity check yourself by following the instructions to run Chkdsk provided in "Stop 0x00000024 or NTFS_FILE_SYSTEM" earlier in this list.
* Another cause of Stop 0x77 messages is defective, malfunctioning, or failed memory hardware, such as memory modules, Level 2 (L2) SRAM cache, or video adapter RAM. If you added new hardware recently, remove and replace it to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the system manufacturer to determine if the component has failed.
* The problem might also be due to cracks, scratched traces, or defective components on the motherboard. If all else fails, take the system motherboard to a repair facility for diagnostic testing.
* Problems that cause Stop 0x77 messages can also cause Stop 0x7A messages. For more information about Stop 0x7A messages, see "Stop 0x0000007A or KERNEL_DATA_INPAGE_ERROR" later in this list.
__________________

Law is offline  
Old 06-26-2006, 01:49 AM   #3 (permalink)
Law
Wizard Techie
 
Law's Avatar
 
Join Date: Aug 2005
Location: the data closet
Posts: 4,200
Default

You might want to try and run a chkdsk to check your harddrive and run memtest to check your memory for any errors. The above was just an explanation of what might be the cause. You might also want to provide us with your hardware spec and OS.
Law is offline  
Old 06-26-2006, 07:44 AM   #4 (permalink)
Monster Techie
 
MrCoffee's Avatar
 
Join Date: Feb 2006
Location: UK
Posts: 1,858
Default

also delete your page file, it may be corrupted.
__________________
Intel core I7 920
GA-EX58-UD3R
6GB OCZ platinum 1600
XFX HD4890
Noctua nh-u12p
Corsair HX520
Antec 300
Samsung 1TB F1 Spinpoint
Samsung SM2443BW 24"
MrCoffee is offline  
Old 06-26-2006, 03:06 PM   #5 (permalink)
Newb Techie
 
Join Date: Jun 2006
Posts: 3
Default

thanks for all the help, much appreciated

MrCoffee: you mentioned deleting the page file, any chance you could give me some directions on how to do that

thanks
frosty007 is offline  
Old 06-26-2006, 03:44 PM   #6 (permalink)
Monster Techie
 
MrCoffee's Avatar
 
Join Date: Feb 2006
Location: UK
Posts: 1,858
Default

i'm not sure how to do it from windows as such, I just edit the registry key

HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\ClearPageFileAtShutdown

Set the value to 1 to delete the pagefile on shutdown.

Theres probably an easier way but thats what I do.
__________________
Intel core I7 920
GA-EX58-UD3R
6GB OCZ platinum 1600
XFX HD4890
Noctua nh-u12p
Corsair HX520
Antec 300
Samsung 1TB F1 Spinpoint
Samsung SM2443BW 24"
MrCoffee is offline  
Old 06-27-2006, 06:12 AM   #7 (permalink)
Newb Techie
 
Join Date: Jun 2006
Posts: 3
Default

thanks for the help MrCoffee

will check back, when/if i get it sorted

much appreciated

__________________

frosty007 is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 06:25 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.