picture 1 of the bios

[yonexorca]

bios and cpu xp 2700 on a7n8x dl

hello i have 2 question

1- i have a 2700+ amd and it run at 166megh on the mother board but it car put it a 200mhg , but my ram is pc 2700(166mhg)

can i do it or i will fry my ram!!!!!



2- i juste bouth the videocard asus fx5200 ...blabla

on the bios they have lost of setting but i dont know want to put
i put 128meg to the video setting but their s the bus and diffirent trick that i dont understand . i will make a picture so pleese help me out



thank s`

 

[yonexorca]

picture of the bios setting

their s the setting what shoud i change

 

[yonexorca]

1

 

[yonexorca]

here is what i need to know

thanks for the advise


but i need to know if in the bios the 2 specification are ok


1- FSB SPREAD SPECTRUM (50%

2- AGP SPREAD SPECTRUM (DISABLED)




IS THIS SETTING OK OR SHOUD I PUT

1- FBS 100%
2-ENNABLED

 

[ekÆsine]

it makes no sense to up your CPU FSB to 200mhz if your memory is running at a slower 166mhz. running the CPU and memory out of sync is pretty much poinless becuase one cannot take advantage of the other's increased FSB.

if you set cpu external freq you should reduce your cpu multiplier or risk CPU overheating or at worst, it could fry that cpu.

i strongly suggest you leave all those settings alone unless you use only pc3200 in the system.

this is useful:

http://forums.extremeoverclocking.com/showthread.php?threadid=20942

 

[yonexorca]

thanks that's what i was thinking