no display / cpu fan fail??? - Page 2 - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Monitors, Printers and Peripherals
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 03-01-2005, 11:38 PM   #11 (permalink)
Banned
 
Join Date: Feb 2005
Posts: 549
Send a message via AIM to bigtimeballer50
Default

i tried a diff fan with a 3 pin conector pluged it into the mobo and it spinend but it still said the same error im not sure if the fans rpm was 2 low or wat =/ i need help asap pleaseee!
__________________

bigtimeballer50 is offline  
Old 03-01-2005, 11:51 PM   #12 (permalink)
Lord Techie
 
Join Date: Jan 2005
Posts: 8,013
Send a message via AIM to DJ-CHRIS
Default

Your motherboard isnt detecting the fan spinning up.

Simple problem, simple solution

RMA your new mobo.

You could try resetting your bios back to defaults, it tells you how to do that in your manual for your mobo
__________________

DJ-CHRIS is offline  
Old 03-01-2005, 11:56 PM   #13 (permalink)
Banned
 
Join Date: Feb 2005
Posts: 549
Send a message via AIM to bigtimeballer50
Default

wats rma maen?
bigtimeballer50 is offline  
Old 03-02-2005, 12:07 AM   #14 (permalink)
Chillin Techie
 
Join Date: Nov 2004
Location: USA
Posts: 11,861
Default

try clearing the cmos on your mobo
__________________
The Ultimate Hard Drive Utility PowerMax 4.23. (It now has the ability to clean a Boot Sector virus on the quick erase option.)
The best browser Netscape 8
Have you accidently delete something? Look here (trial. the better one) and here(free)
EricB is offline  
Old 03-02-2005, 12:07 AM   #15 (permalink)
Junior Techie
 
Join Date: Dec 2004
Posts: 54
Default

Make sure that the 3-prong connector from the fan is plugged correctly into the correct connector. On some mobos if it is tech advanced enough, it will detect the CPU fan only in that connector. THis could cause an error!
__________________
AMD Athlon 64 3400+
nVidia 5700 LE 256 MB
512 MB Corsair XMS Series
bigdawgjts2663 is offline  
Old 03-02-2005, 12:25 AM   #16 (permalink)
Chillin Techie
 
Join Date: Nov 2004
Location: USA
Posts: 11,861
Default

I had the problem before on a computer and setting the bios to the default fix it

I think I clear the cmos
__________________
The Ultimate Hard Drive Utility PowerMax 4.23. (It now has the ability to clean a Boot Sector virus on the quick erase option.)
The best browser Netscape 8
Have you accidently delete something? Look here (trial. the better one) and here(free)
EricB is offline  
Old 03-02-2005, 12:30 AM   #17 (permalink)
Super Techie
 
Join Date: Mar 2005
Posts: 261
Send a message via AIM to bigstanklo
Default

Turn off the power to the mobo and take the little battery out for about 30 min to clear the CMOS. Then disconnect and reconnect the power cord to the heatsink fan and give 'er another try. Also you could try booting with the heatsink fan disconnected simply to see if you can boot at all.
bigstanklo is offline  
Old 03-02-2005, 12:33 AM   #18 (permalink)
Banned
 
Join Date: Feb 2005
Posts: 549
Send a message via AIM to bigtimeballer50
Default

ok i will try those and reply soon ty..
bigtimeballer50 is offline  
Old 03-02-2005, 12:45 AM   #19 (permalink)
Master Techie
 
uzi9mm's Avatar
 
Join Date: Dec 2004
Location: Horseheads, NY
Posts: 2,553
Default

If the CMOS fix does not work, try this, if you have a stock Intel HSF, on the heatsink there should be an Intel hologram, pull that back a little bit(where the wiring enters the module under the sticker), and see if you notice any burn marks. You might of burnt out a resistor or something else.
__________________
INTEL i7 930
ASUS P6X58D
3x2gb Corsair Dominators
EVGA GTX 480
CORSAIR 850-HX
uzi9mm is offline  
Old 03-02-2005, 12:54 AM   #20 (permalink)
Super Techie
 
Join Date: Mar 2005
Posts: 261
Send a message via AIM to bigstanklo
Default

I would think if a resistor burned out the fan probably would not spin up to normal speed (if at all). But the burn check is a good suggestion providing the CMOS doesn't work.
__________________

bigstanklo is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 06:13 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.