I am trying to build my own PC. I bought a fudin case, and only 3 surface mounts were supplied with the case. If I used the surface mounts, then the IO ports on my motherboard( USB/kB/Mouse etc) would not fit into the panel on the case properly, but it fits if I don't use the surface mounts. The case has raised slots for the surface mounts to fix the motherboard. And there are 5 raised portions to fix the motherboard, but there is none at the corner where the power connector on the motherboard is.
If I don't use the surface mounts, I cant boot my machine, it starts and then immediately stops. If I use the surface mounts, the machine boots up properly, but the IO ports are horribly mismatched wrt to the case.
Any help is appreciated very much
Thanks
If I don't use the surface mounts, I cant boot my machine, it starts and then immediately stops. If I use the surface mounts, the machine boots up properly, but the IO ports are horribly mismatched wrt to the case.
Any help is appreciated very much
Thanks