I had a computer building buddy put a system together ordered through newegg, and basically the thing won't read a signal to do anything. The specs are:
Antec case with seperate Antec 430 watt power supply
AMD 64 3200 processor
K8T Neo-FIS2R ATX Motherboard, Socket 754 For 64-bit AMD
ATI X800 pro
GB Mushkin 222 special ram PC3200
160 GB Seagate ST3160023AS SATA Hard drive
DVD|LITE ON 16X SOHD-167T
COMBO 52x32x52|SMSUNG SM-352NENB%BK
We've run out of ideas... I will have to send a Chaintech mobo back and I have replaced it with a K8T Neo-FIS2R ATX Motherboard, because the chainteck nForce3 250 was giving errors. The new mobo is giving no errors but with no signal to the monitor, I can't do anything.
It's like the mobo is not reading the AGP slot... but on both motherboards? The video card was replaced with a working one with no luck. Still no signal to monitor, and neither have onboard video.
Also the hard drive will not come on most of the time. Only one in about 7 tries.
The cd drives only word if the cable is unplugged to them. They are pointless as they are now only ejectable coasters.
As you can see I'm desperate to find any info. Is their anything we may have overlooked during the build? I can't load bios or anything else with no signal, and the monitor works fine.
Antec case with seperate Antec 430 watt power supply
AMD 64 3200 processor
K8T Neo-FIS2R ATX Motherboard, Socket 754 For 64-bit AMD
ATI X800 pro
GB Mushkin 222 special ram PC3200
160 GB Seagate ST3160023AS SATA Hard drive
DVD|LITE ON 16X SOHD-167T
COMBO 52x32x52|SMSUNG SM-352NENB%BK
We've run out of ideas... I will have to send a Chaintech mobo back and I have replaced it with a K8T Neo-FIS2R ATX Motherboard, because the chainteck nForce3 250 was giving errors. The new mobo is giving no errors but with no signal to the monitor, I can't do anything.
It's like the mobo is not reading the AGP slot... but on both motherboards? The video card was replaced with a working one with no luck. Still no signal to monitor, and neither have onboard video.
Also the hard drive will not come on most of the time. Only one in about 7 tries.
The cd drives only word if the cable is unplugged to them. They are pointless as they are now only ejectable coasters.
As you can see I'm desperate to find any info. Is their anything we may have overlooked during the build? I can't load bios or anything else with no signal, and the monitor works fine.