My voltage

[TheMajor]

I wanna know if my PSU is fine cause it could be causing my gfx problems.
I have a few questions:

1) Are my voltages OK?
2) I set my Vcore to 1.850, is it normal it only shows 1.81 or lower sometimes?

 

[TheMajor]

BTW, I know my HDD's are way too hot, but it's almost 95 Fahrenheit outside and I can't help it.

 

[Nubius]

either speedfan is just reading some voltages REALLY wrong or your PSU isn't able to efficiently handle the load given to it.

Just look at your +12v, -12v and the +5VSB rails (the VSB is the voltage stand by...generally is only 2a and is hardly used by anything at all)

Also like you've noticed your vcore is being read pretty low so that also leads me to believe your PSU is being stressed beyond it's limits.

Have you used any other programs like motherboard monitor 5 to check out the voltages it with it to see if they report the same thing?

 

[TheMajor]

I will install MBM and get back to this asap.

 

[TheMajor]

MBM reads the same values. Think I should get a new PSU?