General connection suggestions.. - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Monitors, Printers and Peripherals
Click Here to Login
Closed Thread
 
Thread Tools Display Modes
 
Old 07-28-2005, 08:12 AM   #1 (permalink)
Super Techie
 
Join Date: Jun 2005
Posts: 303
Default General connection suggestions..

Alright. The case comes with a whole buncha wires for its little screen. Now, i already set it up, but havent turned on the power in case something bad happens. Anyways. Here is the setup

Pin - SIGNAL

1 - GND
3 - SLED
5 - PLED
7 - NC
2 - SPK-
4 - BUZ+
6 - BUZ-
8 - SPK+


And here is what wires i got.

Spk R, Spk L, Mic BIAS, Mic OUT, GROUND, Return R, Return L.

Can anyone give me the correct setup please?
__________________

__________________
Sig reinstated. SigSanta
Arumuni is offline  
Old 07-28-2005, 08:13 AM   #2 (permalink)
Ultra Techie
 
Join Date: Jul 2005
Posts: 530
Send a message via AIM to TheHeadFL
Default

You should have some connectors in your case for "Power Switch" and "Reset" as well. Also "Power LED", "HDD LED". You'll need to locate those and then refer to your motherboard manual for how to place them.
__________________

__________________
Desktop machine: 2 x Opteron 246, Asus K8N-DL, 2GB PC3200 ECC Reg., XFX GeForce 6600GT, 74gb WD Raptor, 2 x 19\" LCDs, Windows XP x64
Server machine: Intel P4 3.0GHz 2MB EM64T, ECS i865pe, 1GB PC3200, 36gb WD Raptor, Windows Server 2003
Laptop: Dell Inspiron 9100 (Intel P4 3.2GHz 1MB Prescott, i865pe, 512MB PC3200, Mobility Radeon 9700, DVD+R/DL Burner), Windows XP
Linux: P3 450Mhz, 386MB ram, Slackware 10.1 (Running mySQL/Apache)
TheHeadFL is offline  
Old 07-28-2005, 09:37 AM   #3 (permalink)
Ultra Techie
 
Join Date: Jul 2005
Posts: 813
Default Re: General connection suggestions..

Quote:
Originally posted by Arumuni
Alright. The case comes with a whole buncha wires for its little screen. Now, i already set it up, but havent turned on the power in case something bad happens. Anyways. Here is the setup

Pin - SIGNAL

1 - GND
3 - SLED
5 - PLED
7 - NC
2 - SPK-
4 - BUZ+
6 - BUZ-
8 - SPK+


And here is what wires i got.

Spk R, Spk L, Mic BIAS, Mic OUT, GROUND, Return R, Return L.

Can anyone give me the correct setup please?
Your not going to hurt anything by putting those wires on incorrectly, check your mobo manual, attach the wires and turn it on. If something doesn't work go back to the manual and figure out why. Again, you won't hurt anything.
__________________
Associates Degree in IS

A+ Certified

Studying for Network+
BASSMASTER is offline  
Old 07-28-2005, 09:52 AM   #4 (permalink)
Lord Techie
 
Join Date: Jan 2005
Posts: 8,013
Send a message via AIM to DJ-CHRIS
Default

He CAN hurt stuff by putting them on incorrectly.

JUst match it up, however the front speakers are probolly for speaker outputs, not internal speakers. Wait, everything their is for audio connection's, and not your LCD display. (Pin's 1-8 appear to be somewhere else, important)

I tend to cut those wires out of the case, unless you need audio outputs on the front.
DJ-CHRIS is offline  
Old 07-28-2005, 09:56 AM   #5 (permalink)
Ultra Techie
 
Join Date: Jul 2005
Posts: 813
Default

Quote:
He CAN hurt stuff by putting them on incorrectly.

Like what?
__________________
Associates Degree in IS

A+ Certified

Studying for Network+
BASSMASTER is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 05:27 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.