F1 or delete -turning computer on

[ZeroShade]

When I turn my new computer on... which i built... it always asks me to push f1 to continue or del for the bios settings. How can I set it so that it goes straight to booting up windows? I have an nforce 680i le sli.

 

[Ste]

Motherboards will usually ask you to press F1 after the CMOS has been cleared or the battery is dead.

Therefore make sure your CMOS battery is making proper contact. If not all together replace it..

 

[Ethereal_Dragon]

you might also want to check through the BIOS settings to see if there is anything in there to disable it..... Also, "nforce 680i" would be the chipset... what motherboard is it though?

 

[Nick]

have you got a floppy drive installed? if not disable itin the BIOS as some motherboards are silly and get confused by floppy drives which are old school now

 

[ZeroShade]

Its working now.... restart did the trick.

 

[Nick]

ooooook