Boot issue setting up pc. - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Monitors, Printers and Peripherals
Click Here to Login
Closed Thread
Thread Tools Display Modes
Old 07-18-2005, 06:02 PM   #1 (permalink)
Junior Techie
Join Date: Jun 2004
Posts: 53
Default Boot issue setting up pc.

I am building a PC from spare parts, and having a bit of a problem. I know all of the hardware is compatible because it was all together once before. When I first turned the computer on after assembly, It worked fine, so I went into the bios and changed a couple things, set the third boot device to CD-Rom, etc. after i did this the computer wouldn't boot, so I reset the CMOS w/ the jumper. It worked again, so I changed only 1 thing in BIOS: the cd-rom as boot device. again, the same problem. so i reset the CMOS again, but now I cant get it to boot at all. When I hit the power switch I get fans, psu, etc, but no video and no POST beeps. I have no PCI cards installed or that would be the first thing I would scrap.

Its a DFI PM10-EL w/ a celeron 2.2 ghz processor.


Nevermore is offline  
Old 07-18-2005, 07:53 PM   #2 (permalink)
Junior Techie
Join Date: Jun 2004
Posts: 53

Nevermore is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 01:10 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.