Video card overclock problem - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Hardware Repairs and Troubleshooting
Closed Thread
Thread Tools Display Modes
Old 01-31-2007, 06:23 PM   #1 (permalink)
Newb Techie
Join Date: Nov 2006
Posts: 9
Default Video card overclock problem

Hello everyone,

I was recently doing some video card overclocking with my Geforce 7800GT. I had it going pretty well, but I started messing with the PCI Express frequency in my BIOS, raising it above 100Mhz to try to get some more out of the card. After a few changes when I saved the bios settings my computer just shut off. I tried clearing the CMOS, cause I figured that it was just too much for the card to handle, but that didnt seem to work. When I turn my computer on, the Fans, hard drives, cd drives, graphics card fan, everything will turn on. But I get no beep and no picture on my monitor. The monitor is on but nothing will come up on the screen. I dont think I hurt the card when I was messing around in the bios, because I tried it in another system and it works fine. Whats going on? Something wrong with the PCI Express slot now?

Heres my system in case you need it:

Asus A8N-SLI Premium Mobo
AMD x2 3800+
XFX Geforce 7800GT
1 Gig Corsair XMS
250GB Western Dig

Any suggestions? Thanks.

PlugComputers is offline  
Old 01-31-2007, 06:41 PM   #2 (permalink)
Master Techie
Join Date: May 2005
Location: West Babylon, New York
Posts: 2,021
Send a message via AIM to Pepsiboy700 Send a message via MSN to Pepsiboy700

Did you reset the bios. Usually you take the battery out with the computer unplugged for 10 seconds. Sometimes there is a jumper.

i3 540 @ 3066 MHZ
4GB DDR3 1600 1T 9-9-9-28
2x 750GB
HD 5750 @ 850/2400
Thermaltake 630W
Antec Lanboy Air
Pepsiboy700 is offline  
Old 01-31-2007, 06:50 PM   #3 (permalink)
Newb Techie
Join Date: Nov 2006
Posts: 9

I am pretty sure I did it says in my mobo instruction book to clear CMOS to:

1. turn off computer and remove battery.
2. move jumper from 1-2 spot to 2-3 spot for 10 seconds
3. move jumper back to 1-2 spot
4. insert battery back into mobo
5. turn on computer

Thats the steps i followed, but no luck. Any suggestions?
PlugComputers is offline  
Old 02-01-2007, 05:45 AM   #4 (permalink)
Newb Techie
Join Date: Nov 2006
Posts: 9

Anybody help? Any suggestions?

I tried a difference video card in this motherboard and it didn't work either. And I know it works from another computer...
PlugComputers is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 11:40 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.