So, problem connecting to motherboard.

Status
Not open for further replies.

Thorn

In Runtime
Messages
324
The lights and power switch in the front of my case cannot connect to my mobo. I can get one light to light up, and that is by putting it in the wrong slot. There are four slots on the motherboard where you are supposed to connect those, and five things to connect to it. Can anyone help?




I have Newegg.com - ABIT LG-95 LGA 775 Intel 945G Micro ATX Intel Motherboard - Retail for my motherboard and Newegg.com - Rosewill R230-P-BK Black 0.5mm SECC Steel ATX Mid Tower Computer Case - Retail for my case.
 
You have "hard drive light", "system power light" "power switch", "reset switch".
slots on the motherboard.

The numbers are the pins on the motherboard, "x" means there is no pin.


1234x
56789


system power light is pin "1 positive polarity, 2 ground "
power switch is pin "3 and 4
hard drive light is pin "5 positive polarity, 6 ground"
reset switch is pin "7 and 8"
 
duh, just follow the instructions in your mobo's manual very carefully... easiest thing in the world... and if the manual is wrong... well, you have alot bigger problems than lights not turning on XD - RK
 
Status
Not open for further replies.
Back
Top Bottom