Question about SATA + EIDE HDDs! - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Hardware Repairs and Troubleshooting
Closed Thread
Thread Tools Display Modes
Old 12-26-2007, 07:19 PM   #1 (permalink)
Super Techie
Join Date: Feb 2007
Posts: 286
Default Question about SATA + EIDE HDDs!


What is the best configuration to have when you have one SATA drive on which you have your OS, and then you have two other EIDEs which are just for storage?

Problem: Everything was fine, all three HDDs, working fine and then suddenly BLUE SCREEN OF DEATH and awh computer restarts. Then it gives me the menu for "Last known setting" or "Start windows normally" or "Safemode" and when I pick either of those choices it shows the windows loading screen, the bars, and then it restarts.

What could be the problem? I just reformatted my computer, though it was perfectly fine before and I had the same three HDDs and I haven't changed any setting.

Help! thanks.

bonoz is offline  
Old 12-26-2007, 10:21 PM   #2 (permalink)
Super Techie
Join Date: Feb 2007
Posts: 286
Default Re: Question about SATA + EIDE HDDs!

Apparently it's not even letting me reinstall windows. Whenever I run the setup, press F6 for SCSI devices, choose to hit enter to install XP and it renders the BSODeath.

bonoz is offline  
Old 12-27-2007, 03:17 AM   #3 (permalink)
Junior Techie
Join Date: Dec 2007
Posts: 90
Default Re: Question about SATA + EIDE HDDs!

you might try unplugging the eide drives and just loading up on the sata drive, then installing the IDE drives after that. if that dont work see if you can get your hands on a linux boot disk, boot up off the cd drive with that, it should be able to read your hard drives and see if theres any errors on them. also did you change the jumper settings on the IDE drives? could also be a bios setting.
the_patriot2008 is offline  
Old 12-27-2007, 09:08 AM   #4 (permalink)
Super Techie
Join Date: Feb 2007
Posts: 286
Default Re: Question about SATA + EIDE HDDs!

I'm thinking it's the problem with my sata drive? it gives me a bsod error, a stop 0x00000000024 ntfs.sys error. Something to do with drivers maybe?

"Stop 0x24, indicates that a problem occurred within Ntfs.sys (the driver file that allows the system to read and write to NTFS drives). "

What should I format? reformat the drive? but how? xp cd won't do it, because it is ntfs it is not detected in DOS, any other way? thanks.
bonoz is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
SATA 2 Question juh-may-uh-kun mon System Upgrades 0 10-07-2007 10:31 PM
SATA and Core 2 Duo Question spinard New Systems | Building and Buying 8 10-03-2007 11:58 AM
IDE RAID and SATA RAID togather abadjay Hardware Repairs and Troubleshooting 1 10-02-2007 01:37 PM
EIDE recommended for be best interfaced HDD to go with then SATA 3.0? Wildside New Systems | Building and Buying 6 04-28-2007 05:14 PM

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 08:47 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.