RMBillings
Beta member
- Messages
- 2
I am trying to setup on my media workstation and I am having problems initialization the volume after i setup the Raid through the raid untiliy. It does not matter what Raid I try 0, 1, 5, 10. I go into disk managment in Windows 7 and I see the volume and everything looks good with the volume and the properties. But when I try to initialization the volume it clocks for about 5 seconds and then just stops. There is no error or anything. I am adding some details below but now sure what details needed. Any help would be great. Thanks
Motherboard - Gigabyte GA-MA69GM-S2H
Harddrives - 4 hard drives - Western Digital Caviar Green 2 TB,Internal,5400 RPM,3.5" (WD20EARS) Hard Drive
Raid Controller - Addonics ADSA4R5 PCI Low Profile SATA II (3.0Gb/s) 4-Port RAID 5 / JBOD Controller
OS - Windows 7
Motherboard - Gigabyte GA-MA69GM-S2H
Harddrives - 4 hard drives - Western Digital Caviar Green 2 TB,Internal,5400 RPM,3.5" (WD20EARS) Hard Drive
Raid Controller - Addonics ADSA4R5 PCI Low Profile SATA II (3.0Gb/s) 4-Port RAID 5 / JBOD Controller
OS - Windows 7
