Hi and thanks for taking the time to see if you can help.
My new rig:
2x1GB ddr2 800Mhz - - - Or it should be!
Qtechnology 400W silent PSU
2x 80gb samsung spintpoint Hard drives in Raid0 setup.
I dont know how to get the ram running at 800MHZ.
I have set the CPU host frequency to 266Mhz (as instructed in the Mobo user guide) for a 1066 FSBchip, which the E6600 is.
Using easy tune5 i tried to change the frequency of the ram to 800 from the displayed 665Mhz. This just caused my system to not reboot.
Got windows re-installed, and here i am.
I ran CPU-Z and it told me my ram timings were 22.214.171.124 and the frequency was 333Mhz !!! The ram should run at 126.96.36.199!
Whats going on? Easy tune says the ram is running at 665 and CPU-z says 333 . . . they cant both be right!
Can someone give me a difinitive answer on this one? I havent spent £160 on ram to have it running the same speed as low end DDR ram!
Any help would be much appreciated as this is frustrating the **** out of me!