Techist - Tech Forum

Techist - Tech Forum (http://www.techist.com/forums/)
-   Hardware Repairs and Troubleshooting (http://www.techist.com/forums/f77/)
-   -   no video (http://www.techist.com/forums/f77/no-video-79047/)

rushman 12-21-2005 05:26 PM

no video
 
OK, here's the situation. I recently purchased a Supermicro 370DLE. It has dual PIII 1.0Ghz CPU's and a stick of 128MB ECC RAM. I have it out of the case and connected to a 100 Watt power supply and a rage 2C PCI video card. When I power it up, I get one beep from the board, the cpu's seem to be working but I get no video. I have cleared the CMOS, changed the video card to all four PCI slots, used a different video card but still no video. I realize that this PSU is not what is needed but I didn't think that just trying to get it to boot would require much power. This is the only spare PSU I have and I didn't want to buy another one just to have the same problem. Thanks for any replies.

Martin 12-21-2005 05:31 PM

Two P3's alone would consume 70 watts........ but in any case, do you have another graphics card to test or does the motherboard come with integrated graphics?

rushman 12-21-2005 05:32 PM

Yes, I tried a Nvidia card also. Still no luck

WorldIndustries 12-21-2005 06:02 PM

Is it slot one? Once I could NOT get video from my P2. Tried everything. Finally, after an hour, I noticed the processor was not fully in the slot, because I pulled it out for cleaning, and never pushed it all the way back in.

Before I knew that, everything seemed to be working except the video, no beep errors, thought my video card was busted.

WorldIndustries 12-21-2005 06:03 PM

BTW, forgot to add, mine was also a dual processor, and only one of the processors was not placed in correctly for video to not work.

rushman 12-21-2005 09:38 PM

Dual socket 370 on the CPU's. I checked them also. No luck


All times are GMT -5. The time now is 06:52 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.