No good...New build won't post

Status
Not open for further replies.
So I had the RAM in the wrong freaking slot...what a dope. Grr one board RMAd, for no reason. Hopefully they still credit the purchase...

The manual for that mobo is incorrect. When I followed the manual I was running in single channel as it said that slots 1&3 were one channel and 2&4 were one channel. Asus's site says it is 1&2 and 3&4 which is correct.
 
See my latest post, power supply was likely killing my motherboard or GPU and causing strange noises in my case

I had Logisys, I wouldn't give Diablotek ANY more credit

Spend the $$$ go Thermaltake/OCZ in the VERY least Raidmax
 
See my latest post, power supply was likely killing my motherboard or GPU and causing strange noises in my case

I had Logisys, I wouldn't give Diablotek ANY more credit

Spend the $$$ go Thermaltake/OCZ in the VERY least Raidmax

If you are going to give advice on power supplies at least read the PSU Guide and learn what brands are worth a crap, mate. I would use an OCZ (not my first choice by any means), but that would be the only one of those mentioned in your post.
 
Status
Not open for further replies.
Back
Top Bottom