Newly built computer freezing after first day.

callzumen

Beta member
Messages
1
Location
sweden
Hi I have recently built a new computer for my brother, I didn't have much experience in it before but I talked to a few people and was informed that all the parts were fine.

ASUS P8Z77-V LX2 - ATX / Z77

ASUS GeForce GTX 660 Ti 2GB DirectCU II

Corsair PowerSupply (PSU) CX600 600W 80+ Bronze

Corsair Vengeance Low Profile 8GB DDR3 PC3-12800 1600MHz

Intel Core i5-3570K

Seagate Barracuda 1TB (Cache 64MB / 7200RPM / Sata 6Gb/s) ST1000DM003

After building in originally wouldn't show any VGA or HDMI signal, but after switching the slots the RAM was in it worked fine. The PC ran fine for the first night of usage.

Today it has been incredibly slow and when opening almost any program it will slow to a near stop then blue screening and restarting instantly without me even being able to look at the blue screen message.

Any help is greatly appreciated.
 
Check to see if the ram s compatible with this motherboard. Also go into Bios and try setting your bios to default. I read quit a few complaints on new egg about CPU socket bent pins. Even more so this board has lots of complaints in general. I would think about RMA the board and go for something different if possible.
 
Last edited:
Back
Top Bottom