I bought a system that is what I would call the last one I'll ever need, (right!) but as I'm putting some of my old stuff in it I came upon a problem. I have on one IDE1 slot two hard drives. One master & one slave. On IDE2 I have a DVDROM (set as a master) and put on an old smaller hard drive that has some info on it that I would very much like to access. I hooked it up with the same ribbon as the DVDROM and set the jumpers on it as a slave. The CMOS recognises it as being a secondary slave but when I boot it up into XP I don't find the drive. Any suggestions would be helpful. Thanks