motherboard question

Status
Not open for further replies.

deeppurple

Solid State Member
Messages
7
Ok my motherboard for my Hp pavilion 533w has fried, and hp does not sell this part anymore and i need help find a new one or one that will run my system properly, here are my specs...



Motherboard supplier Trigem
System BIOS supplier Phoenix
Form factor uATX
Processor brand Intel
Processor socket type mPGA478
Processor family P4 and Celeron (Willamette, Northwood)
Proc. Front Side Bus Freq. 400 MHz
Chipset name 845GL
Chipset "North Bridge" 845GL
Revision/stepping A1
Chipset "South Bridge" ICH4
Revision/stepping A1
Super I/O SMsC LPC47M102
Revision/stepping VS142AV
Flash BIOS device 2 DIMMs (184 Pin)
Memory type DDR
Memory speed PC2100/PC1600
Memory sockets 2 DIMMs (184 Pin)
Maximum memory 2 GB (HP and Compaq recommend 1 GB)
Graphics supplier Intel
Graphics configuration Down, In Chipset
Onboard graphics memory UMA/up to 48 MB
Graphics connector (AGP None
TV-Out device No
TV-Out configuration ADD TVout card
Audio AC'97 Down
AC'97 CODEC device ADI1981A
Audio Jacks (Mic, Line-In, Line-Out, Spkr, MIDI/Game) M,LI,LO,SO
Ethernet 10/100 LAN supplier Realtek RTL8100(B)
Ethernet configuration PCI, Down
IDE UDMA modes ATA-66/100
USB ports 6
USB Front/Back options 2F+4B
Serial, Parallel, Floppy, PS2 Kbd and Mouse 1S, 1P, 1F, PS2 K+M
Serial Port Front Chassis option No



Some ppl have told me a few that will work( Asus P4p800-E, P4C800-E, and the Abit IC7-G ) but im not that good at matchin up motherboards, so if anyone will help my i would greatly appricate it.
 
Your mobo is a microATX socket 478.

This link will take you to all of the microATX 478 mobos at NewEgg:
http://www.newegg.com/Product/Produ...y=280&ATTR3=2010200280+1070509907&Order=price

I don't know Intel, but from where I am, the Gigabyte GA-8IG1000MK and the ASUS P4P800-VM look sweet. Both can handle up to 4 gig of RAM and support dual-channel.

The EPoX EP-4VKMI and the ASUS P4V8X-MX look good, but both can only handle 2 gig and have no dual-channel. Both of these offer built in SATA RAID.

All four of the boards I listed offer AGP 4X/8X.
 
So if i use the:


PC CHIPS P25G Socket 478 VIA P4M800 Micro ATX Intel Motherboard - Retail

AGP Slots: 1x AGP 4X/8X
CPU Type: Intel Pentium 4 Prescott/Celeron
DDR Standard: DDR 400 (PC 3200)
FSB: 800/533MHz
Maximum Memory Supported: 2GB
Number of DDR Slots: 2x 184pin DDR
PCI Express x16: None
PCI Slots: 3
South Bridge: VIA VT8237
Supported CPU Technologies: Hyper-Threading Technology

That will run my system properly? or will i have to buy accessories???? Thanks for that much help
 
So if i buy that mobo. and that Vcard i should be set??? Sorry for all the trouble but im not to good with my hardware....
 
My mom works with a guy that does work on pc's, but he didnt have time to look up the motherboard, but he said he would charge me 25 $$ to reconnect a motherboard, does that price range sound good?
 
That price is **** good... it's $90/hr just to look at a computer where I'm at.
 
Status
Not open for further replies.
Back
Top Bottom