Here's a weird problem for you guys to solve...
I recently put together a new pc out of some new/old parts.
Basically what happens is I turn on the pc, which boots up fine, except for after the OS loading screen's finished.
After the loading screen is finished the monitor goes into standby mode (No Video Signal)
Here's the weird part. If I unplug the DVI cable, then reattach it, the screen comes up fine. All the drivers for the system are installed, and after reattaching the DVI cable everything works fine.
I tried removing the graphics card and using the onboard graphics, which works fine. So I'm thinking it's gotta be the drivers I'm using for the card.
Graphics Card: X300
Driver: Catalyst 9.3
Monitor: Pretty standard 19" LCD
OS: Winxp Home (fresh install)
Ideas?
I recently put together a new pc out of some new/old parts.
Basically what happens is I turn on the pc, which boots up fine, except for after the OS loading screen's finished.
After the loading screen is finished the monitor goes into standby mode (No Video Signal)
Here's the weird part. If I unplug the DVI cable, then reattach it, the screen comes up fine. All the drivers for the system are installed, and after reattaching the DVI cable everything works fine.
I tried removing the graphics card and using the onboard graphics, which works fine. So I'm thinking it's gotta be the drivers I'm using for the card.
Graphics Card: X300
Driver: Catalyst 9.3
Monitor: Pretty standard 19" LCD
OS: Winxp Home (fresh install)
Ideas?