TheBluePanther
Beta member
- Messages
- 2
Hi guys,
I've upgraded to a new Powercolor HD5850. However, after properly installing the GPU I'm getting nothing on my display.
Specs –
- Q6600 @ stock
- 4.0GB DDR2 G.skill PI @ 1066MHz
- Asus P5Q Pro (latest bios)
- Windows 7 Ultimate 64bit
- PSU – Thermaltake Toughpower Qfan 750W
- GPU – Powercolor HD5850 (formerly 2xHD4850 CFX)
My PSU handles my CFX setup up perfectly.
What I've done so far-
1.) Use both PCIE slots
2.) Upgrade to newest drivers
3.) Downgraded to older drivers
Note – I booted up to Windows with a HD4850 on slot 1 and the HD5850 on slot 2. Via this method the HD5850 shows up on my device manager. Also the card seems to be running and the fan is working.
Any help would be much appreciated. I've really been saving up for a DX11 card for ages.
Thanks in advance,
Marc.
I've upgraded to a new Powercolor HD5850. However, after properly installing the GPU I'm getting nothing on my display.
Specs –
- Q6600 @ stock
- 4.0GB DDR2 G.skill PI @ 1066MHz
- Asus P5Q Pro (latest bios)
- Windows 7 Ultimate 64bit
- PSU – Thermaltake Toughpower Qfan 750W
- GPU – Powercolor HD5850 (formerly 2xHD4850 CFX)
My PSU handles my CFX setup up perfectly.
What I've done so far-
1.) Use both PCIE slots
2.) Upgrade to newest drivers
3.) Downgraded to older drivers
Note – I booted up to Windows with a HD4850 on slot 1 and the HD5850 on slot 2. Via this method the HD5850 shows up on my device manager. Also the card seems to be running and the fan is working.
Any help would be much appreciated. I've really been saving up for a DX11 card for ages.
Thanks in advance,
Marc.