HT cpu =no boot or post - Techist - Tech Forum

Go Back   Techist - Tech Forum > Computer Hardware > Hardware Repairs and Troubleshooting
Closed Thread
Thread Tools Display Modes
Old 06-10-2007, 06:32 PM   #1 (permalink)
Newb Techie
Join Date: Jun 2007
Posts: 9
Default HT cpu =no boot or post

i pulled a P4 ht 3.0 ghz CPU from what was thought to be a mobo fried pc when i put in a pc who boots with a celeron D processor , it will not boot or beep and nothing on the screen but fans and hard drives spin ?

i checked BIOS but can not find where to enable HT if i have to ?) and i looked on mobo manufactures website and the cpu support list list all p4 as compatible\

would i dead CPU result in no boot or beeps or video ? or is there a config setting in BIOS i have to change (i looked but i see nothin about HT )

thanks all

aaron_mcd is offline  
Old 06-10-2007, 06:43 PM   #2 (permalink)
Newb Techie
Join Date: Jun 2007
Posts: 9
Default Re: HT cpu =no boot or post

is it possible the first time i put the P4 in that i did not put it in correctly or would it beep if i installed it incorrectly , i was sure it was level , heat sink fan spun , and lever was down

EDIT: somebody better know or i will be sad

aaron_mcd is offline  
Old 06-11-2007, 06:43 AM   #3 (permalink)
Junior Techie
Join Date: Jun 2006
Posts: 64
Default Re: HT cpu =no boot or post

first of all.. funs and hard drives spinning, have nothing to do with
the boot. those devices just take power from the power supply.

you said that you pulled out a cpu from a fright motherboard.
propably this cause problems to the processor.

i suggest NOT to check the processor on another system because you may cause damage to the other system also. i think most propabilities there are on damaged cpu.
djb is offline  
Old 06-11-2007, 03:13 PM   #4 (permalink)
Newb Techie
Join Date: Jun 2007
Posts: 9
Default Re: HT cpu =no boot or post

thanks for the answer , it did not damage the system however also i knew that the fans and what not had nothing to do with tho CPU i was stating that there was a slimmer possible it was say the HDD fault for not booting or rolling out that the system did not over heat because fans were spinning .
aaron_mcd is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to boot from a boot disk? Ioanni Microsoft Windows and Software 6 05-07-2007 05:53 PM
Boot Mgr Missing ??? RedTail Microsoft Windows and Software 9 05-01-2007 12:43 AM
Help! MSI-P6N-SLI-Platinum NO POST. Reply Quick! Slooch Hardware Repairs and Troubleshooting 0 04-23-2007 12:57 PM
Can't boot from CD. Jehryn Microsoft Windows and Software 3 04-21-2007 11:22 AM
boot cd Pabulum Microsoft Windows and Software 6 04-09-2007 08:51 AM

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 10:08 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.