Dell 1150 laptop help

Status
Not open for further replies.

sPlAtOiD

Fully Optimized
Messages
1,748
I know this is a stretch but I'll ask anyway. I have a Dell 1150 that someone gave to me. It wont take a charge and the power jack is toast.
So I bought a new power jack and was soldering it to the board and the hole the number 2 pin goes into is missing the ring so there is nothing to soldering it to.
I'm trying to find someone that would know where pin number 2 leads to so I can put a bypass wire on to fix this problem. Or where I can find this info. I don't think there's anywhere to find it but thought I'd ask.

The pin layout is
1-2-1 the 1-2-1 being on the inside opposite side from where it plugs in.
4-3-4
4-3-4
 
Hello,

...So I bought a new power jack and was soldering it to the board and the hole the number 2 pin goes into is missing the ring so there is nothing to soldering it to...

Still kinda confoosed about What's missing. Any chance you could illustrate it on the image below?

It should fit on like this:

DELL%20Jack%208500,%20&%20more.JPG
 
Status
Not open for further replies.
Back
Top Bottom