Curbkiddytech
In Runtime
- Messages
- 181
- Location
- USA
I just got a Cooler Master Haf X full tower case. Took all of my parts from the old case and put them into the Haf X. I turn on the computer when it's finished and after 15 seconds I get the POST beeping "CPU Fan Failure!" message. Looked inside the case and the fan was spinning just fine. I checked the hardware monitor in the BIOS settings and saw that my CPU temp was 85 degrees Celcius. So i shut the computer down, cleaned the CPU fan of dust, applied some thermal paste, made sure the CPU fan was working and all the other fans in the case worked, turned the computer back on and got the same freaking message!
My specs are:
PSU- OCZ Modular 700W
Motherboard- ASUS Rampage Formula III
CPU- Intel Core i7 950 Bloomburg
RAM- G.Skill 4 GB DDR3
4 HDDs- 2 160 GB and 2 500 GB running on RAID 1 for both sets
Anyone have any ideas on what the deal is?
My specs are:
PSU- OCZ Modular 700W
Motherboard- ASUS Rampage Formula III
CPU- Intel Core i7 950 Bloomburg
RAM- G.Skill 4 GB DDR3
4 HDDs- 2 160 GB and 2 500 GB running on RAID 1 for both sets
Anyone have any ideas on what the deal is?