I am trying to set my XP pro system to boot from a mirrored RAID 1, but everytime it gets to the windows loading screen it blues screens and reboots.
My original C drive is a single 40Gig IDE drive.
Copied the C: 40Gig Drive image to an 80Gig SATA using CasperXP.
Then moved the 80Gig SATA to my Highpoint RocketRAID 1520 on port 1.
Set up a (mirrored) RAID 1 in the Highpoint Bios without trouble.
Set up my Asus MB BIOS to boot to SCSI.
Restart.
BIOS appears to start normally, the ASUS MB (audio) tells me that it is booting to the OS
I see the WINDOWS display on the screen for a quick instant, then a blue screen for another instant(too fast to read), then reboot.
I get the same problem if I try a XP safe-mode boot.
So I am looking for any ideas(HELP) of what I might be missing. Do I need some SATA driver in the Windows XP OS loaded?
It this even possible?
Thanks for any help and ides of things to try.
My original C drive is a single 40Gig IDE drive.
Copied the C: 40Gig Drive image to an 80Gig SATA using CasperXP.
Then moved the 80Gig SATA to my Highpoint RocketRAID 1520 on port 1.
Set up a (mirrored) RAID 1 in the Highpoint Bios without trouble.
Set up my Asus MB BIOS to boot to SCSI.
Restart.
BIOS appears to start normally, the ASUS MB (audio) tells me that it is booting to the OS
I see the WINDOWS display on the screen for a quick instant, then a blue screen for another instant(too fast to read), then reboot.
I get the same problem if I try a XP safe-mode boot.
So I am looking for any ideas(HELP) of what I might be missing. Do I need some SATA driver in the Windows XP OS loaded?
It this even possible?
Thanks for any help and ides of things to try.